The Linksys switch’s front panel will indicate the status of the connection. After powering on the switch and connecting a computer or network device to an available numbered port, the following should be lit:

• System
• 1, 2, 3, 4, 5, 6, 7 or 8  

NOTE:  The number of Ethernet LEDs depends on the number of Ethernet ports of the switch. 

Checking the Switch’s LEDs 

Step 1:
Make sure the System LED is lit.

Step 2:
Make sure the numbered port (1, 2, 3, 4, 5, 6, 7 or 8) is lit.

NOTE: If the numbered port (1, 2, 3, 4, 5, 6, 7 or 8) is not lit, make sure the computer is powered on. You can also try connecting the PC using another working cable.

The Linksys switch’s front panel will indicate the status of the connection. After powering on the switch and connecting a computer or network device to an available numbered port, the following should be lit:

• System
• 1, 2, 3, 4, 5, 6, 7 or 8  

NOTE:  The number of Ethernet LEDs depends on the number of Ethernet ports of the switch. 

Checking the Switch’s LEDs 

Step 1:
Make sure the System LED is lit.

Step 2:
Make sure the numbered port (1, 2, 3, 4, 5, 6, 7 or 8) is lit.

NOTE: If the numbered port (1, 2, 3, 4, 5, 6, 7 or 8) is not lit, make sure the computer is powered on. You can also try connecting the PC using another working cable.